Tower Crane Rentals and Sales Roseville - Cranes are a popular kind of industrial equipment commonly used in the materials handling industry. Depending on the application, cranes may have wire ropes, sheaves, chains or a hoist rope. These components enable cranes to lift and lower items vertically as well as transporting items horizontally. Shipping containers, giant crates, heavy machinery and other items can be transported efficiently.
Freight Transportation
Cranes simplify loading and unloading and moving items. Different models have various lifting capacities. Cranes offer a great job site support and the mechanical advantage of an extended lifting capacity. Cranes are commonly found on construction sites and a variety of industries.
Specified Use
Jib cranes can be tiny and are suited for cramped and smaller environments including workshops while giant tower cranes can be employed to construct high-rises. There is the right crane model available for numerous applications. Some cranes can allow access to tight spaces. Floating cranes can be useful for salvaging sunken ships and other marine items. They may also be used on oil rigs.
Tower Cranes
The type of crane that is fixed on a concrete slab is a tower crane. This model is commonly attached to the sides of structures. It offers precise height and lifting reliability. Popular for building tall commercial buildings and residential structures, the base is mounted to the mast to create even further reach once extended. The crane is capable of rotating thanks to the mast that connects to the slewing unit. Above the slewing component, the operator cab is situated, along with the long horizontal jib and the counter jib.
The main component responsible for carrying the load is the long horizontal jib. The counterweight is created by the counter-jib that may utilize concrete blocks. The jib handles the load to and from the center of the crane. Normally the crane operator stays inside of a cab found on top of the tower attached to the turntable; although, it may be mounted on the jib instead. Operators can use a radio remote control unit from the ground. Electric motors are used to operate the lifting hook and control wire rope cables located within a sheaves system. The long horizontal arm houses the cargo hook and its’ motor. Often, the operator works alongside a rigger to accurately coordinate unhooking and hooking loads. Hand signals are an important part of daily safety. The rigger determines the crane’s lifting schedule and is responsible to make sure everything load and rigging wise is reliable and safe.
Truck-Mounted Cranes
Truck mounted cranes consist of two parts including the boom and the carrier. The carrier and the boom have an attached turntable to enable the upper component to swing from side to side. Updated hydraulic truck cranes are typically single-engine units. The same engine is responsible for providing power to the crane and the undercarriage. The pump mounted on the lower area of the crane supplies power to the upper part of the crane via hydraulics and a turntable. Original, older hydraulic crane truck models commonly featured dual engines. One engine allowed the crane to be pulled down the road while the other engine controlled the hydraulic pump for the jacks and outriggers. There are operators who would rather run the older two-engine models due to the frequent turntable leaks that often occur in some of the newer designs.
Cranes commonly have to travel via roads to get to different jobs. This can eliminate industrial transportation requirements unless the crane is sizeable with certain weight restrictions. Local laws may be in place regarding transportation. Typically, larger cranes are outfitted with trailers to help distribute the load over numerous axles. Certain cranes can be taken apart to meet certain requirements. Often an additional truck will follow the crane. The truck has the counterweights that have been disassembled for travel.
Outriggers & Stability
Outriggers horizontally extend from the cranes’ chassis to provide stability. Vertical stability is achieved by the outriggers to keep the machine level while completing hoisting and stationary applications. Some truck crane units can travel at slow speeds even while carrying a suspended load. Extra care is taken to make sure the load does not swing side to side from the travel direction. The majority of the anti-tipping aspect is related to the stiffness of the chassis suspension. Many models include moving counterweights to be adjusted to enhance stabilization farther than what the outriggers provide. Suspended loads are among the most stable due to the majority of the crane’s weight acting as a counterweight. Safeguards are in place electronically to monitor the maximum safe loads for traveling speeds and stationary work.
Overhead and Bridge Cranes
An overhead crane is often referred to as a bridge crane. This concept features a hook-and-line mechanism and a crane with a horizontal beam that is made to run along rails. These cranes are similar to gantry cranes that are typically found in factory buildings. They attach to rails which run alongside two walls. Double beam or single beam construction model crane designs are available for overhead cranes, which may rely on complex box girder beam or regular steel beams. Certain overhead cranes have the ability to use a control pendant for operation. Areas that need heavy lifting around ten tons or more can rely on a double girder bridge. The box girder design creates a system featuring higher system integrity with a lower deadweight. The hoist can lift the cargo along with the bridge portion covered by the crane and the trolley that can travel along the bridge.
The manufacturing process of the steel industry utilizes cranes frequently. Steel is typically handled by an overhead crane until it is transformed into a finished piece and leaves the factory. From raw materials to pouring hot steel and moving finished product, overhead cranes handle steel at every stage. Overhead cranes lift steel components onto trucks. Metal fabricators and stampers use this equipment every day including the auto industry to transport raw materials.
Pulp & Paper Mills
Bridge cranes are commonly used in pulp mill maintenance. They are responsible for removing equipment including heavy press rolls. Bridge cranes are used in the construction of paper machines as they facilitate the installation of giant equipment and apparatus including the cast iron paper drying drums and other massive items.
Loader Crane
Powered with an electric articulated arm attached to a trailer or truck for loading and unloading, the loader crane is complete with many joints to facilitate folding the machine into a small space between jobs. These telescoping abilities are useful. Some models can even load or stow themselves on their own without any operator intervention. To complete viewing access of the load, the operator must move around the vehicle. Hydraulic controls that are mounted on the crane may work with a portable cabled control system and a radio-linked system.
Gantry Crane
A gantry crane features a hoist located on a trolley running horizontally along rails, often fitted on two beams or a single beam or in a fixed machinery house. The gantry system supports the crane frame with equalized beams. Wheels are running along the gantry rail, typically perpendicular to the direction the trolley travels. The gantry cranes are available in numerous sizes. Some models can move extremely heavy loads for industrial and shipyard applications.
Tower Cranes PDF
