As opposed to a sit-down model, the stand-up lift truck model is completely different to operate. The way wherein you lift cargo and your movements are totally different. If you do not have proper training for utilizing a stand-up unit, you can probably cause harm co-workers or to yourself. When using a stand-up unit, you should follow the correct safety rules. There are some basic operating standards which should be met when operating a stand-up unit.
When beginning, stand up on the forklift in order to get a feel for the steering knob and the controls. The steering is handled using the knob steering plate instead of a steering wheel. Remember that this knob moves really fast, therefore, you must be accustomed to moving it gently so as to be sure not to over steer. The horn is located on the control handle, like with the control for the fork movement and for forwards, backwards. The floor pedal enables the machine to move.
If you are ready to begin, turn the key to start the machine. Be sure that your forks are retracted. When you are moving around the floor, the forks should be pointed slightly upwards. Never drive with the forks in their extended position. If you are traveling forwards, move the control handle forward and to make the lift move forward, step on the pedal. If you are backing up, be sure to beep your horn so as to warn individuals around you. Look behind you prior to stepping on the pedal in order to make sure the way is clear and safe. Next, while stepping on the pedal, pull the control handle towards you. Stay focused and alert and make sure that you are always operating in a safe way.
When approaching a corner with the lift truck, turn the steering knob in the direction you are heading. Make sure to keep your hands on the control handle and keep your foot on the accelerator. When turning right, the steering knob would move in a clockwise direction during forward travel. If you are turning left, your steering knob will go in a counter-clockwise direction.
If you have just used sit down models, the stand-up versions could take some getting used to. If you take some time to know the equipment and with some training, you would be able to handle loads efficiently and quickly in little time.